Staystitching is a stitch sewn through a single layer of cloth. It used to reduce distortion.

 

This is due to the fact that the curve cuts the aspect of cloth, round the prejudice. To see this in action, cut on a curve and pull it. You will see that curve changes. You get the idea, although that is a whole lot more intense than that which would occur to a garment!

 

You may use it everywhere there are seams which you believe can become stretched outside Even though staystitching is used around necklines. Since they’re cut in a small bias Additionally, it is frequently used on shoulders.

 

4 tips for staystitching

  • To staystitch a curve, set your stitch length to 1.5. Smaller stitches like this create a stronger hold.
  • The standard would be to sew 1/8″ from the sewing line, therefore in case your seam allowance is 5/8″, then stitch 1/2″ from the raw edge.
  • It is important to staystitch after cutting your cloth. Moving your cloth depending on the cloth, can stretch curves outside.
  • In the edges toward the middle, stitch for regions like necklines. To put it differently, begin at the same shoulder and stitch into the front. Then sew into the front out of the shoulder. This retains the staystitching even.